ipadtrio.blogg.se - Sainsmart dds140 firmware

Sainsmart dds140 firmware install#
Sainsmart dds140 firmware driver#

The les is typically used on a system using the systemd/logind mechanism to grant access to plugged in devices to the currently active user.

Sainsmart dds140 firmware install#

Install either les or les to the same directory.

Copy the udev rules file from libsigrok/contrib/les to /etc/udev/rules.d/.

These steps prevent the need to run libsigrok frontends as superuser.

Build and install a libsigrok frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see Building.

You can also browse the source code via gitweb. $ git clone git:///sigrok-firmware-fx2lafw Or you can get the latest development snapshot of the source code from git: There are also pre-built firmware files that can be used without having to build them from source: Released versions of the source code can be downloaded here:

Sainsmart dds140 firmware driver#

The following oscilloscope devices are supported (if marked as such) by fx2lafw (and by the hantek-6xxx driver in libsigrok):ġ The Rocktech BM102 is a rebadged SainSmart DDS120 (or vice versa).ġ The Voltcraft DSO-2020 is a rebadged Hantek 6022BE. Seems to be the same hardware as the Robomotic MiniLogic.ĥ It seems 6-Labs has/had permission from Saleae to distribute the hardware in Ukraine (only)? Various adapters are available, for example RS422/RS232/CAN, galvanic isolation, "BNC divider".Ħ There is apparently a post from the author of XZL-Studio AX in some forum.ħ There's an RS232/RS485/RS422/CAN converter board for this.Ĩ Digital channels have invalid numbers, check XZL Studio DX for details. "Mollex" is the name of the guy who seems to sell it on some forum.Ĥ Clone of the USBee AX (SX?) and Saleae Logic, see also here and here. For analog support PD0-PD7 (plus additional hardware) is usually used.ġ Analog signal support is not yet implemented.Ģ Even though this device has the same USB VID/PID as the CWAV USBee AX-Pro, it only has 8 channels and no analog support.ģ Clone of the USBee AX and Saleae Logic. For 8 probes the FX2 pins PB0-PB7 are used, for 16 probes PB0-PB7 and PD0-PD7. The following logic analyzer / mixed-signal devices are supported (if marked as such) by fx2lafw (and by the fx2lafw driver in libsigrok):Īll devices use a 24MHz crystal. The devices marked as Clone are those that clone the USB VID/PID of the original product, and also have no own PC software/firmware, but instead illegally ship the software of the original product/manufacturer.

Here's a quick overview of some of the relevant hardware information we have about the various devices. The fx2lafw firmware is meant to work on any FX2-based hardware, including logic analyzers, FX2 eval boards, oscilloscopes, or other hardware which has this chip on-board. 1.1 Logic Analyzers / mixed-signal devices.